DesignJet 750CPlus (D-size)
HP Parts Reference Guide™
www.hp.com/go/hpparts
Carriage Drive Parts
Belt
1C4705-60082 Carriage belt (D-size) - Long/wide belt attached to the carriage
Bracket
2C3195-40017 Carriage motor bracket
Bushing
3C2858-40017 Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly
Cable
4C3195-80009 Carriage assembly trailing cable - Two ribbon cables bundled together - 1.8m (6.0ft) long
Carriage
5C4708-69113 Pen carriage assembly - Drafting 'Head' for the plotter (holds tri-color and one black ink cartridges) - Front bushing is included and cannot be ordered separately
REQUIRES RETURN OF DEFECTIVE PART
C4708-60113 New Part for C4708-69113
Clamp
6C3195-40026 Ribbon cable clamp (top half) - Secures the trailing cable to the top of the carriage assembly
7C3195-40027 Ribbon cable clamp (bottom half) - Secures the trailing cable to the top of the carriage assembly
Encoder
8C2858-60010 Linear encoder IC - Detects carriage position as it moves along encoder strip
NO LONGER SUPPLIED
Holder
9C3195-40024 Cable holder (Small U-Shaped piece on top) - One of two pieces that hold the trailing cable to the main chassis
10C3195-40025 Cable holder (Large piece on bottom) - One of two pieces that hold the trailing cable to the main chassis
Motor
11C3195-60112 Carriage drive motor assembly - Includes motor and cable
Pulley
12 | C3195-60169 | Idler pulley - Applies tension to the left end of the carriage belt |
Spring
13C1633-80014 Compression spring - For the rear bushing on the carriage
14C3195-80002 Compression spring - For the pulley wedge - Applies tension to the carriage belt
15 | C4699-00016 | Encoder spring |
Strip
16C4713-60098 Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
Wedge
17 C3195-40039 Pulley wedge tensioner - For carriage (Y-axis) belt tension
Electronic Accessories
Cable (Interface)
13242G | RS-232C cable - 25 pin (M) to 25 pin (M) - 5.0m (16ft) long |
| NO LONGER SUPPLIED |
17255D | RS-232C serial cable - 25 pin (M) to 25 pin (F) - 1.2m (3.9ft) long |
| NO LONGER SUPPLIED |
17302A | RS-232C serial cable - 25 pin (M) to 8 pin (M) DIN - 1.5m (4.9ft) long |
| NO LONGER SUPPLIED |
24542G | RS-232C serial cable - 25 pin (M) to 9 pin (F) - 3.0m (9.8ft) long - Used to connect to HP Vectra and IBM PC/AT |
| compatibles |
31391A | RS-232C serial extension cable - 25 pin (M) to 25 pin (F) - 5.0m (16.4ft) long |
5063-1256 | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m |
| (6.6ft) long |
