HP 760c Using Keystone Correction, Menu, Enter, Enter, Setting, Keystone, Or press the, If the image becomes uneven, decrease the sharpness setting. (See page 49.)

If your image is still distorted, you can correct it using the Keystone buttons on the projector’s control panel or the projector’s Setting menu.

Using Keystone Correction

To adjust your image when it is wider on the top or bottom, do the following:

■Press one of the two triangular buttons on the projector’s control panel, as shown below. Continue pressing the button until you are satisfied with the shape of the image.

Keystone correction

note

The image will be slightly smaller after adjusting. If it’s important to maintain the correct aspect ratio, use the menu system to perform keystone correction, then use the remote’s Resize button to adjust the aspect ratio. See page 32.

■Or press the Menu button on the remote control or projector, select the Setting menu, and press Enter.

From the Setting menu, select Keystone and press Enter. Use the pointer button on the remote control to adjust the keystone setting as needed.

If the image becomes uneven, decrease the sharpness setting. (See page 49.)

Displaying and Adjusting the Image 23