Battery
Description | Spare part number |
|
|
|
|
Before removing the battery, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the rear cover (see Rear cover on page 14).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss of information, save your work or shut down the tablet through Windows before removing the battery.
Remove the battery:
1.Disconnect the battery cable (1) from the system board.
2.Release the shielding tape (2) from the battery.
3.Remove the four Phillips PM1.75×4.0 screws (3) and the Phillips PM1.75×3.0 screw (4) that secure the battery to the tablet.
16 | Chapter 4 Removal and replacement procedures preliminary requirements |