HP 800 G1 17

Feature		Function	Default setting,	Reboot
			if applicable	required

	Option ROM Prompt	Displays the Option ROM prompt on POST screen	Enabled	Yes

	After Power Loss	Specifies system state after power loss	Off	Yes

	POST Delay (in seconds)	Specifies amount of delay to add during POST for certain peripherals	None	Yes

 Remote Wakeup Boot Source		Specifies boot device after a remote wakeup event	Local Hard Drive	No

 Factory Recovery Boot Support		Enables BIOS support for HP Backup and Recovery tools	Disabled	Yes

 Bypass F1 Prompt on		Allows system to boot without user input after configuration change	Disabled	No
	Configuration Changes	(for example, memory size)

BIOS Power-on		Specifies time and day(s) when system automatically wakes from the	Disabled	Yes
		S5 (off) state		Yes
		S5 (off) state

Onboard Devices		Specifies a Legacy Device’s IRQ, DMA, and I/O Range settings	Serial Port A:	Yes
			IO=3F8h, IRQ=4
			Parallel Port:
			IO=378h, IRQ=7,
			DMA=1
			Printer Mode:
			EPP+ECP

Bus Options				Yes

	PCI SERR# Generation	Enables PCI device to generate SERR# (System Error), as defined by	Enabled	Yes
		the PCI specification

 PCI VGA Palette Snooping		Enables VGA palette registers snooping	Disabled	Yes

Device Options – All-in-One (AIO) systems				Yes

	Turbo Mode	Enables processor feature that optimizes core frequencies can be	Enabled	Yes
		optimized for performance based on the load on each core		Yes
		optimized for performance based on the load on each core

 Num Lock State at Power-on		Enables Number Lock at boot	Off	Yes

	LVDS Panel Select	Enables panel type/vendor selection override	Automatic	Yes

	Internal Speaker	Enables or disables the internal speaker	Enabled	Yes

 USB EHCI Port Debug		Forces all USB ports to use USB 2 for debugging utilities and other	Disabled	Yes
		applications that do not support USB 3

	Multi-processor	Enables BIOS to report multiple processor cores to the OS	Enabled	Yes

	Hyperthreading9	Enables hyperthreading capability on Intel processors; some programs	Enabled	Yes
		may run better with this feature disabled.

	USB Charging Port	The top left-side USB port on AIO systems can be used to charge USB	Enabled	Yes
		devices when the system is powered off.

Device Options – Other systems				Yes

	Turbo Mode	Enables processor feature that optimizes core frequencies can be	Enabled	Yes
		optimized for performance based on the load on each core

 Num Lock State at Power-on		Enables Num Lock at boot	Off	Yes

	Integrated Video	Enables integrated video controller	Enabled	Yes

	Internal Speaker	Enables or disables the internal speaker	Enabled	Yes

 USB EHCI Port Debug		Forces all USB ports to use USB 2 for debugging utilities and other	Disabled	Yes
		applications that do not support USB 3

	Multi-processor	Enables BIOS to report multiple processor cores to the OS	Enabled	Yes

9Intel HT Technology (HT) is designed to improve performance of multi-threaded software products and requires a computer system with a processor supporting HT and an HT-enabled chipset, BIOS and OS. Please contact your software provider to determine compatibility. Not all customers or software applications will benefit from the use of HT. See http://www.intel.com/info/hyperthreading for more information.