Feature
USB Charging Port
Secondary Battery Fast Charge
Virtualization Technology
Virtualization Technology for Directed I/O
TXT Technology
Multi Core CPU
Intel HT Technology
NumLock on at boot
Hybrid Graphics
Hybrid Graphics Enhanced Display Feature
Max SATA Speed
Ctrl I Prompt
HP HV Secure Boot
HP HV Secure Version Control
HP HV Secure Boot Configuration Lockdown
Intel Rapid Start Technology
Entry on S3 RTC wake
S3 Wake Timer
Entry on S3 Critical Battery wake event
Express Card Link Speed
Function | Default setting, | Reboot |
| if applicable | required |
|
|
|
Allows an external device to charge until a specified battery charge | Enabled, 10% | Yes |
level is reached |
|
|
|
|
|
Stops charging the primary battery at 90% and begins charging a | Enabled | Yes |
secondary battery to optimize the charge cycle |
|
|
|
|
|
Enables VT on | Disabled | Yes |
virtual machines |
|
|
|
|
|
Grants virtual machines direct access to peripheral devices on select | Disabled | Yes |
Intel platforms |
|
|
|
|
|
Enables Trusted Execution Technology on select Intel platforms, a | Disabled | Yes |
feature that defends against |
|
|
information stored on the system |
|
|
|
|
|
Enables dual/quad processor cores | Enabled | Yes |
|
|
|
Enables | Enabled | Yes |
|
|
|
Enables Number Lock at boot | Disabled | Yes |
|
|
|
Enable / Disable or allow BIOS to automatically enable / disable Hybrid | Enabled | Yes |
Graphics based on OS (when set to Auto). | (Auto on |
|
|
| |
When set to Auto, Hybrid Graphics is disabled for certain Linux OS. | Workstation) |
|
When set to Disable, only the integrated graphics adapter is used on |
|
|
selected platform. On Workstation, only the discrete graphics adapter |
|
|
is used. |
|
|
When set to Enable, both the integrated and discrete graphics adapters |
|
|
are used. |
|
|
|
|
|
Enable additional display capability to allow | Enabled | Yes |
visible on any one of the available display at boot. |
|
|
When disabled, |
|
|
displays (Internal Panel, VGA, System Display Port on selected |
|
|
platforms) at boot. Digital displays attached to dock will not support |
|
|
|
| |
|
|
|
Selects the maximum SATA port speed between SATA II (3.0 Gbps) or | 3.0 Gbps / 6.0 | Yes |
SATA III (6.0 Gbps) | Gbps |
|
|
|
|
Enables the Ctrl +I Prompt, which allows the user to enter the RAID | Disabled | Yes |
Configuration Utility |
|
|
|
|
|
Enables the HP Hypervisor, which allows multiple operating systems to | Disabled | Yes |
run concurrently and share the system hardware |
|
|
|
|
|
Enables BIOS to check the specific version of the HP | Disabled | Yes |
Hypervisor package against the allowed version stored in |
|
|
BIOS |
|
|
Note: The platform only boots to the default boot loader configuration |
|
|
file that is distributed with the target HP Hypervisor package. |
|
|
|
|
|
Enables the hypervisor to verify its current configuration against a | Disabled | Yes |
saved setting |
|
|
|
|
|
Enables Intel Rapid Start Technology, which improves | Disabled | Yes |
battery life and system resume time above current Standby |
|
|
and Hibernate levels. |
|
|
Note: This feature only works when an SSD is detected. Currently, it is |
|
|
only supported in mSATA |
|
|
|
|
|
Enables RTC wake to trigger the transition from S3 to Intel Rapid Start | Disabled | Yes |
Technology |
|
|
|
|
|
Specifies the length of time the system remains in S3 before an RTC | 5 minutes | Yes |
wake event is triggered |
|
|
|
|
|
Enables critical battery event support on Intel Rapid Start Technology; | Disabled | Yes |
wakes the system to provide an alert that the |
|
|
|
|
|
Sets speed for Express Card Link. Generation 1 will set the Link Speed | Generation 2 | Yes |
to max 2.5 Gbit/s and Generation 2 will set the Link Speed to a |
|
|
maximum of 5.0 Gbit/s |
|
|
|
|
|
10