QuickSpecs

HP Compaq 8100 Elite Series

Technical Specifications

configuration. If the administrator password is not known, the BIOS version cannot be changed and changes cannot be made to BIOS settings using F10 setup or under the OS.

Advanced Configuration and Power Interface (ACPI) – Represents a significant innovation in power and configuration management, allowing operating systems and applications to manage power based on activity and usage. HP Elite models use ACPI to provide power conservation features.

S5 Max Power Savings setting supports EU Lot6 requirement and allows the computer to power down below 1W is S5 (when turned off). When S5 Max Power Savings feature is enabled power to slots is turned off along with WOL functionality.

Other Features

Advanced Configuration and Power Management Interface (ACPI). Allows the system to wake from a low power mode. Controls system power consumption, making it possible to place individual cards and peripherals in a low-power or powered- off state without affecting other elements of the system.

System Management BIOS v2.6

Intel Wired for Management support; industry wide initiative to make Intel architecture based PCs, servers and mobile computers more inherently manageable out-of-the-box and over the network

Dual State Power Button; acts as both an on/off button and a suspend-to-sleep button

Serviceability Features

Dual colored power LED on front of computer to indicate either normal or fault condition Diagnostic LED Explanation Table:

Number of 1-second red LED blinks followed by a 2-second pause, then repeats: 2 – processor thermal protection activated

3 – processor not installed

4 – power supply failure

5 – memory error

6 – video error

7 – PCA failure (ROM detected failure prior to video)

8 – invalid ROM, bootblock recovery mode

9 – system not fetching code

10 – system hang while loading an option ROM System/Emergency ROM

Flash ROM

CMOS Battery Holder for easy replacement

Flash Recovery with Video Configuration Record Software 5 Aux Power LED on System PCA

Processor ZIF Socket for easy Upgrade Over-Temp Warning on Screen (Requires IM Agents) Clear Password Jumper

DIMM Connectors for easy Upgrade Clear CMOS Button

NIC LEDs (integrated) (Green & Amber)

Dual Color Power and HD LED - To Indicate Normal Operations and Fault Conditions Color coordinated cables and connectors

Tool-less Hood Removal

Front power switch

System memory can be upgraded without removing the system board or any internal components

Tool-less Hard Drive, CD & Diskette Removal

Green Pull Tabs, and Quick Release Latches for easy Identification

DA - 13524 Worldwide — Version 24 — April 22, 2011

Page 20