Connecting to a television

NOTE If you have the optional the HP camera dock, see Connecting to the HP camera dock later in this chapter.

1To connect the camera directly to a television, you must first purchase a custom cable (HP #Q2146-61601). This cable is listed in the accessory catalog included in the camera box.

2On the camera, check that the TV Configuration setting in the Setup menu is set for your area. See “Changing the TV configuration setting” on page 53.

3 Connect the TV cable to the USB/ TV connector on the camera, and then to the Audio/Video input on the television.

4Refer to the documentation for

your television to determine how to set the television to take video input from your camera instead of the antenna or cable TV.

5When connected, the camera

starts a slide show of each image, playing any attached audio clip or video clip, and then fading to the next image.

NOTE The Display on the camera turns off when the camera is connected to a TV.

You can also manually scroll through the images by pressing the Left/Right arrows on the camera.

NOTE You can still use the Main and Share menus while connected to the television.

5-Connecting

43