Command Line Interface Reference Guide

copy

 

 

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■cv_out_flash < primary secondary > -- Copy from primary/secondary flash. (p. 108)

■xmodem -- Use xmodem on the terminal as the data destination. (p. 135)

■cv_out_flash < primary secondary > -- Copy from primary/secondary flash. (p. 108)

■copy running-config-- Copy running configuration file. (p. 123)

■tftp -- Copy data to a TFTP server. (p. 124)

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■usb -- Copy data to a USB flash drive. (p. 133)

■filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)

■xmodem -- Use xmodem on the terminal as the data destination. (p. 135)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■copy startup-config-- Copy in-flash configuration file. (p. 123)

■tftp -- Copy data to a TFTP server. (p. 124)

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■usb -- Copy data to a USB flash drive. (p. 133)

■filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)

■xmodem -- Use xmodem on the terminal as the data destination. (p. 135)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■copy tftp -- Copy data from a TFTP server. (p. 124)

■autorun-cert-file-- Copy autorun trusted certificate to the switch. (p. 105)

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■append -- Add the key(s) for operator access. (p. 102)

■manager -- Replace the key(s) for manager access; follow with the 'append' option to add the key(s). (p. 117)

■append -- Add the key(s) for access. (p. 102)

■operator -- Replace the key(s) for operator access (default); follow with the 'append' option to add the key(s). (p. 119)

■append -- Add the key(s) for access. (p. 102)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■append -- Add the key(s) for operator access. (p. 102)

■manager -- Replace the key(s) for manager access; follow with the 'append' option to add the key(s). (p. 117)

■append -- Add the key(s) for access. (p. 102)

■operator -- Replace the key(s) for operator access (default); follow with the 'append' option to add the key(s). (p. 119)

© 2009 Hewlett-Packard Development Company, L.P.

99