Command Line Interface Reference Guide

copy

 

 

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■usb -- Copy data to a USB flash drive. (p. 133)

■filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)

■xmodem -- Use xmodem on the terminal as the data destination. (p. 135)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■copy config < config1 config2 config3 > -- Copy named configuration file. (p. 106)

■config -- Copy data to specified configuration file. (ASCII-STR) (p. 106)

■tftp -- Copy data to a TFTP server. (p. 124)

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■xmodem -- Use xmodem on the terminal as the data destination. (p. 135)

■pc -- Change CR/LF to PC style. (p. 120)

■unix -- Change CR/LF to unix style. (p. 131)

■copy crash-data-- Copy the switch crash data file. (p. 107)

■card -- Enter single slot identifier. (SLOT-ID-RANGE) (p. 105)

■tftp -- Copy data to a TFTP server. (p. 124)

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■usb -- Copy data to a USB flash drive. (p. 133)

■filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)

■xmodem -- Use xmodem on the terminal as the data destination. (p. 135)

■mm -- Copy from the management card. (p. 119)

■tftp -- Copy data to a TFTP server. (p. 124)

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■usb -- Copy data to a USB flash drive. (p. 133)

■filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)

■xmodem -- Use xmodem on the terminal as the data destination. (p. 135)

■tftp -- Copy data to a TFTP server. (p. 124)

■tftp-ip-- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■tftp-ipv6-- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)

■filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)

■usb -- Copy data to a USB flash drive. (p. 133)

■filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)

© 2009 Hewlett-Packard Development Company, L.P.

97