Command Line Interface Reference Guide

aaa

 

 

secret

■aaa port-access supplicant [ETHERNET] PORT-LISTidentity IDENTITY secret

■aaa port-access supplicant [ETHERNET] PORT-LISTsecret

Trigger the command to ask user for a password for the supplicant to use.

server-timeout

■aaa port-access authenticator [ETHERNET] PORT-LISTserver-timeout < 1 to 300 >

Set the authentication server response timeout (default 30sec.).

Range: < 1 to 300 >

■aaa port-access mac-based [ETHERNET] PORT-LISTserver-timeout < 1 to 300 >

Set the authentication server response timeout (default 30 seconds).

Range: < 1 to 300 >

■aaa port-access web-based [ETHERNET] PORT-LISTserver-timeout < 1 to 300 >

Set the authentication server response timeout (default 30 seconds).

Range: < 1 to 300 >

ssh

■aaa authentication ssh

Usage: aaa authentication ssh <enablelogin>

<primary-method> [<backup-method>]

Description: Configure authentication mechanism used to control SSH access to the switch.

Parameters:

o enable

-

Configure access to privileged mode.

o login

-

Configure login access.

o <primary-method> -

Specifies the primary authentication

 

 

method for access control. Use <TAB>

 

 

or <?> after you specify enable or login

 

 

to get a list of all available

o <backup-method> -

 

primary authentication methods.

Specifies an authentication method

 

 

to use, if the primary authentication

method is not able to check user's credentials.

Use <TAB> or <?> after you specify the primary authentication method to get a list of all available backup methods.

Next Available Options:

■enable -- Configure access to the privileged mode commands.(p. 33)

■login -- Configure login access to the switch.(p. 36)

ssl-login

■[no] aaa port-access web-based [ETHERNET] PORT-LISTssl-login

Set whether to enable SSL login (https on port 443) (default disabled).

© 2009 Hewlett-Packard Development Company, L.P.

50