Connect speaker

 

channels (plugs)

To PC back connector

 

 

Front speakers

Audio (Line) Out (lime-green)

 

 

Rear speakers

Audio (Line) In (blue)

Center/subwoofer

Mic-1 (pink)

speakers

 

3Turn on the PC.

4Turn on your speaker system.

5Configure the multi-channel audio output; refer to the next procedure.

To configure multi-channel audio output for speakers configuration

1Click Start on the taskbar.

2Choose All Programs.

3Choose Multi-channel Sound Manager, and then click Multi-channel Sound Manager again. The Audio Configuration window opens.

Note: If you do not see the Speaker Configuration tab, your PC does not have the multi-channel option.

4Click the Speaker Configuration tab. (Your speakers must be connected to see this tab.)

5Select the option describing the number of speakers in your system, for example,

6 speaker mode (for 5.1 channels). You can click the Speaker Test tab and then click on a speaker to test it.

6Click OK.

Understanding the

6-In-1 Memory Card Reader

The 6-In-1 memory card reader can read from and write to six types of memory cards and to the IBM Microdrive™ disk drive.

Special note about the

Safely Remove Hardware utility

Warning: Do not click Stop in the Safely Remove Hardware window while the USB Mass Storage Device is selected. Doing so removes the operating system recognition of the 6-In-1 memory card reader from your PC. You must restart the PC to use your reader again.

Updated HP Media Center PC Information

5