Introduction
Fixing Common Installation Problems
where N = card slot, and # = monitor type
5.Set the console path to the graphics card by typing: pa co graphics(N)
6.Reconnect the keyboard to the system and cycle the system’s power. The system console should now display.
System’s X-server or CDE Does Not Come Up or Recognize the Graphics Card
If the system’s
1.Place the new card in the new slot location and boot to
2.Delete the old device files by typing: rm /dev/crt*
3.Create the new device files by typing: insf
4.Finish booting to CDE or HP VUE by typing: init 3
Chapter 1 | 19 |