6
are correct, the camera should operate. If the current
time is within a start and stop time in the sequence file, the sequence is executed.
The default is to use dynamic scaling of the data. The operator can set the scaling to «fixed».
In the Image_1 window:
Display |
|
|
| |
¤ Fixed | Min/Max 0 1500 | (is useful settings.) | ||
This settings | do not affect the data saved | to disk. The | ||
datarange is 12 bit. The operator can move | the cursor around in | |||
the image. In | the lower left corner of the | Image_1 window is | ||
displayed: |
|
|
|
|
X .# | Y .# | I .# |
|
|
I is the data | value [0 - 4095]. |
|
| |
The name of the data files are diplayed in | the Aurora Camera | |||
Control window: |
|
|
| |
e.g. 06:50:50 | File name: C:\data\images\981215\06\98121506.33G |
The extention 33 is a hex number (starts on 00 every hour) and G indicates that this image is taken with a green filter (R indicates red filter).