Worldwide — Version 13 — January 30, 2012
DA - 13540
Page 5
I/O Panel Layout:
(screen side)
NOTE: I/O Panel located at rear, lower side of display under cover; I/O view when facing 15" touch screen and bottom flipped up
Intel integrated high-definition audio with 2-channel Via VT1708S codec
1
2 (lock kit sold separately)
1
1: 24 Volts
USB+power Keyboard (PS/2) Parallel port Kensington Lock Hole
Warning: This is a Powered VGA Port. Do not hot plug a monitor into the VGA port. Doing so may damage the monitor. Always power down the ap5000 when removing or attaching a monitor to the VGA port.
1
1
1: DC 19Volts for 130W AC power adapter 1
3: COM 1 and COM 2 (5 V configurable in BIOS), COM 3 (12V configurable in BIOS)
NOTE: When the HP 2-line VFD is preconfigured by the HP factory, COM 2 port is occupied. When the optional 10.4” Customer Facing Display is installed, all three COM ports become available.
Audio line out Microphone in Power connector RJ-45/Ethernet RS232 ports
6: 5 (located at bottom of main display behind access panel), 1 left side (behind access panel)
USB 2.0
Warning: This is a Powered VGA Port. Do not hot plug a monitor into the VGA port. Doing so may damage the monitor. Always power down the ap5000 when removing or attaching a monitor to the VGA port.
1
VGA
External USB only (not included).
NOTE: an optical drive is required to restore the software image.
Optical Drive
(2) 2.5" internal storage bays: 160 GB or 250GB 2.5" Hard Disk Drive (HDD) (select models), 64 GB or 80GB 2.5" Solid State Drive (SSD) (select models)
NOTE: The ap5000 can be configured with a combination of the 160 GB, 250 GB HDD or 64 GB, 80 GB SSD; however, if RAID 1 is requested from the HP Factory, both storage bays must contain the same size drive.
Hard Drive or Solid State Drive
HP ap5000 All-in-One (AiO) Point of Sale (POS) System
QuickSpecs
Standard Features
Storage
I/O Panel
Audio/Visual