Wait or reboot. Encarta demonstrates similar behavior on other PCs but the behavior is a bit different from PC to PC and time to time. Some times the system is hung.

If fax/modem set up in WFW, Control Panel, FAX, then no MS-MAIL remote.

Known MS bug.

Unit locks up after modem connection in terminal, PCMCIA inserted.

Do not insert or remove modems when terminal programs are running.

With low memory, OB Status Panel gives error; won't restart completely.

Close some applications or buy some additional memory.

DBLSPACE doesn't always recognize drives d: and e: as compressed

Make sure that DSCOPY.BAT in the DOS directory was run to install the proper support for DoubleSpace. Unplug and re-plug the card. If that does not work, unplug, reboot and re-plug.

Exiting Windows after installing Corel SCSI drivers restarts Windows

This is normal DOS behavior and is not unusual after a batch file has been edited and lengthened by an install program prior to its termination.

After sending a fax with MS-MAIL and megahertz modem unit can't turn off.

Known MS bug.

Hot insertion of Bus Toaster SCSI card causes hang-up requiring reset

Don't HOT plug/unplug any communication card.

CardView interferes with password, system hangs.

Do not use password.

CardView beeps at ON/OFF, w/o inserting/removing cards.

Do not set CardView to Beep on insertion/removal.

CardView gives notification for Unrecognized card with SRAM cards

Ignore warning or do not use SRAM cards.

CardView gets confused if cards changed at approximately the same time

Wait several seconds before inserting/removing a second card.

33