Start Here

1

USB cable users: Do not connect the USB cable

until step A2.

Use this guide to set up the hardware and connect the HP All-in-One to either your computer or a working network. If you have problems during setup, see Troubleshooting later in the guide.

2

a

Remove all tape and lift display

b

a Remove all tape and protective film from

 

 

the lid and from the front and back of the

 

device.

b Lift the color graphics display and remove the protective film. You can adjust the height of the display to a position suitable for viewing.

3 Locate components

Windows CD

Mac CD

Documentation CD

This CD may be included for some languages where help is not available through the software.

HP Photosmart C5100 All-in-One series

Basics Guide

 

4 x 6 in

USB cable*

 

(10 x 15 cm) photo paper

*Purchased separately

 

Basics Guide

 

adapter

control panel faceplate

Ethernet cable*

(may be pre-attached)

 

 

*Purchased separately

 

 

The contents of your box may differ

 

 

Additional network equipment

power cord

 

specified later in the guide.

ink cartridges

 

 

 

HP Photosmart C5100 All-in-One series Setup Guide