C5150/C5200/C5400/C5400n

Duplex Option

Installation Instructions

Oki 42158411 Duplex Unit
Install the Duplexer
1.Unpack the duplexer and remove the shipping materials.2.Turn off the printer.3.Insert the duplexer through the hinged door in the back of the printer.4.Turn on the printer.5.Print out the Menu Map.

ON LINE

BACKENTER

MENUCANCEL

a.Press + one or more times until

INFORMATION MENU appears on the display.

b.Press ENTER twice. The MenuMap prints.

6.Check to be sure that “DUPLEX installed” shows in the information at the top of the first page. If it doesn’t, turn off the printer and push firmly on the duplexer to be sure it is firmly seated in the printer, then turn on the printer and print the MenuMap again.

7.If you will always be using duplex printing, go into the printer menu and change the default setting for DUPLEX to ON:

a.Press + until you see PRINT MENU on the display.b.Press ENTER.c.Press + until you see DUPLEX on the display.d.Press ENTER.e.Press + to change the setting from OFF to ON.

f.Press ENTER to engage the setting, then press ON-LINEto save the setting and exit the menu.

Activate the
Duplexer in the
Printer Driver
Windows®
PCL Driver (C5400, C5400n)

Click Start Settings Printers [Printers and Faxes for XP]. The Printers (Printers and Faxes) dialog box opens.

8.Right click the PCL printer icon, then click Properties

9.Click the Device Option(s) tab. 10.Click Duplex Option Unit.

11.Click OK, then close the Printers (Printers and Faxes) dialog box.Postscript Emulation Driver (C5400n)

1.Click Start Settings Printers [Printers and Faxes for XP].

The Printers (Printers and Faxes) dialog box opens.

2.Right click the Postscriptemulation printer icon, then click

Properties.

3.Next:

Windows XP, 2000 and NT 4.0: click the Device Settings tab.

Windows Me and 98: click the

Device Options tab.

4.Under Installable Options, click Duplex and select Installed.

5.Click OK, then close the Printers (Printers and Faxes) dialog box.Hiper-C Driver (C5150, C5200)

1.Click Start Settings Printers [Printers and Faxes for XP].

The Printers (Printers and Faxes) dialog box opens.

2.Right click the printer icon, then click Properties.

3.Next:

Windows XP, 2000 and NT 4.0: click the Device Option(s) tab.

Windows Me and 98: click the

Printer Properties tab, then click the Device Option tab.

4.Select Duplex Option Unit.

5.Click OK, then close the Printers (Printers and Faxes) dialog box.

Macintosh®
OS 8.x and 9.x (C5400n)1.Activate Chooser from the Apple menu.

2.Select LaserWriter 8.

3.Click Printer Setup.

4.Click Configure.

5.Change the Duplex Unit setting to

Installed.

6.Click OK twice.7.Close Chooser.OS X to X.1 (C5400n)No activation is required.
(continued on back)
© 2004 Oki Data Americas, Inc.

58368601