POST Error Messages Continued |
|
|
Screen Message | Beeps* | Probable Cause |
None | Keyboard failure. |
None | Keyboard failure. | |
Unit Error |
|
|
2S | IRQ address conflicts with | |
Assignment Conflict |
| another device. |
2S | IRQ address conflicts with | |
Assignment Conflict |
| another device. |
2S | Both external and internal | |
Conflict Detected |
| ports are assigned to |
|
| parallel port X. |
2S | IRQ address conflicts with | |
|
| another device. |
2S | IRQ address conflicts with | |
Interrupt Conflict |
| another device. |
1L, 2S | Graphics display controller. | |
Failure |
|
|
* L = Long, S = Short
Recommended Action
1.Reconnect keyboard with computer turned off.
2.Check connector for bent or missing pins.
3.Ensure that none of the keys are depressed.
4.Replace keyboard.
1.Reconnect the keyboard with computer turned off.
2.Ensure that none of the keys are depressed.
3.Replace keyboard.
4.Replace system board.
Reset the IRQ.
Reset the IRQ.
1.Remove any parallel expansion cards.
2.Clear CMOS.
3.Reconfigure card resources and/or run Computer Setup (F10 Setup).
Reset the IRQ.
Reset the IRQ.
1.Reseat the graphics card (if applicable).
2.Clear CMOS.
3.Verify the monitor is attached and turned on.
4.Replace the graphics controller.
continued
Deskpro Service Reference Guide |