Choosing a Startup Image

1Turn the power on, and set the camera to the PLAYBACK mode ( page 13).

2

3

4

5

6

Open the menu.

Press the MENU button, then use the four-way control to select Start-up Image () and press the OK button.

Press or to select the image you want, then press the OK button to apply the choice.

A message “Completed” appears.

Set the camera to the Setup Menu (page 18).

Press or to select

Start-up .Image () then press

or the OK button.

Press or to select a desired option and press the OK button to apply the setting.

[Off]: Disable the start-up image.

[System]: Use camera default image.

[My image]: Use the image that you just specified in step 3.

7Press the MENU button to close the menu.

Caution

The start-up image will not be deleted even if the original image is deleted or

memory formatted.

52