6.If it is necessary to replace the webcam/microphone module or microphone module:

a.Detach and release the module (1) as far as the module cable allows. (The module is attached to the display enclosure with double-sided tape.)

b.Disconnect the module cable (2) from the module.

c.Remove the webcam/microphone module (3) or microphone module. The webcam/ microphone module is available using spare part number 646138-001. The microphone module is available using spare part number 645980-001.

7.If it is necessary to replace the hinge covers:

a.Remove the two Phillips PM2.5×5.0 (1) screws that secure the hinge covers to the display enclosure.

Component replacement procedures

63