HP CQ61-117TX, CQ61-126TU, CQ61-131TU Connecting a USB device, Stopping and removing a USB device

Connecting a USB device

CAUTION: To prevent damage to a USB connector, use minimal force to connect a USB device.

▲To connect a USB device to the computer, connect the USB cable for the device to the USB port.

You will hear a sound when the device has been detected.

NOTE: The first time you connect a USB device, the "Installing device driver software" message is displayed in the notification area, at the far right of the taskbar.

Stopping and removing a USB device

CAUTION: To prevent loss of information or an unresponsive system, stop a USB device before removing it.

CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To stop and remove a USB device:

1.Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar.

NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon (< or <<) in the notification area.

2.Click the name of the device in the list.

NOTE: If the USB device is not listed, you do not have to stop the device before you remove it.

3.Click Stop, and then click OK.

4.Remove the device.

2 Chapter 1 Using a USB device