Hardware Upgrades

6.Open both latches of the memory module socket 1, and insert the memory module into the socket 2.

Installing a DIMM

7.Begin by installing a module into the socket nearest the preinstalled module, and install the modules following the numerical order of the sockets.

8.A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. Push the module down into the socket, ensuring that the module is fully inserted and properly seated 3.

9.Repeat steps 6 through 8 for any additional modules that you want to install.

10.Replace the computer cover.

11.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.

The computer should automatically recognize the additional memory the next time you power on the computer.

2-10

Hardware Reference Guide