SCOTTY WOOD FURNACE – INSTRUCTION MANUAL
KERR SCOTTY Wood Furnace | Model |
Certified by the Canadian Standards Association
Manufactured by: Parrsboro Metal Fabricators Ltd. P.O. Box 637, Crossroads 12118, Highway 209 Parrsboro, Nova Scotia, Canada B0M 1S0
SPECIFICATIONS
Length |
| 46 | 1/2” |
Width |
| 22 | 1/2” |
Height |
| 43” | |
Shipping Weight |
| 344 lb | |
Fire Box 1/8”plate | Length | 27 | 1/2” |
| Diameter | 18” | |
Secondary Heat Exchanger | 14 gauge steel | ||
Fire Box Door | Cast Iron | 12” x 12” | |
Warm Air Plenum |
| 29” x 20 3/4” | |
Return Air Plenum |
| 14 | ½” x 20 3/4” |
Air Filter Size |
| 16” x 20” x 1” | |
Blower Size |
| G9 – 10 | |
Blower Motor |
| 1/4 hp | |
CFM |
| 1000 (Required) | |
Smoke Pipe |
| 7” Inside Diameter | |
Floor to smoke pipe center | 36” | ||
Output (max) |
| 70,000 Btu/h | |
Fuel |
| Wood 24” logs | |
Electrical Rating |
| Volts 120, Cycles 60, Amps 15 |
NOTE – Keep this manual in a safe place for future reference. Follow manual carefully for the correct way to install and operate this unit.
CAUTION – Do not fire this unit until operating instructions have been read and fully understood.
INSTALL WOOD FURNACE ONLY ON A FURNACE DUCT SYSTEM AND CHIMNEY
THAT ARE IN GOOD CONDITION AND APPROVED FOR USE.
SAVE THESE INSTRUCTIONS
Scotty | 3 |