Table 5 Computer
● USB Wake on Device Insertion (some
● Unique Sleep Blink
● S0 = Solid green LED.
● S3 = 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e., repeated cycles of 3 blinks and a pause.
|
|
|
| ● S4 = 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e., | ||
|
|
|
|
| repeated cycles of 4 blinks and a pause. | |
|
|
|
| ● S5 = LED is off. | ||
|
|
|
| If this feature is disabled, S4 and S5 both have the LED off. S1 (no longer supported) and S3 | ||
|
|
|
| use 1 blink per second. | ||
|
|
|
|
|
|
|
Hardware Power | SATA power management enables or disables SATA bus and/or device power management. | |||||
Management |
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermal | ● Fan idle | |||||
|
|
|
|
|
|
|
|
|
|
|
| NOTE: This setting only changes the minimum fan speed. The fans are still automatically | |
|
|
|
| |||
|
|
|
|
| controlled. | |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 6 Computer
Option | Heading |
|
|
Allows you to set: | |
| ● POST mode (QuickBoot, FullBoot, or FullBoot every |
| ● POST messages (enable/disable). |
| ● F9 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text F9 = |
| Boot Menu during POST. Disabling this feature prevents the text from being displayed. |
| However, pressing F9 will still access the Shortcut Boot [Order] Menu screen. See |
| Storage > Boot Order for more information. |
| ● F10 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text |
| F10 = Setup during POST. Disabling this feature prevents the text from being displayed. |
| However, pressing F10 will still access the Setup screen. |
| ● F11 prompt (hidden/displayed). Setting this feature to displayed will display the text |
| F11 = Recovery during POST. Hiding this feature prevents the text from being displayed. |
| However, pressing F11 will still attempt to boot to the HP Backup and Recovery partition. |
| See Factory Recovery Boot Support for more information. |
| ● F12 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text |
| F12 = Network during POST. Disabling this feature prevents the text from being displayed. |
| However, pressing F12 will still force the system to attempt booting from the network. |
| ● Factory Recovery Boot Support (enable/disable). Enabling this feature will cause an additional |
| prompt, F11 = Recovery, to be displayed during POST on systems with HP Backup and |
|
|
10 Computer Setup (F10) Utility | ENWW |