Computer Setup—Power

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 5 Computer Setup—Power

Option

Description

 

 

OS Power

● ACPI S3 Hard Disk Reset—Enabling this causes the BIOS to ensure hard disks are ready to

Management

accept commands after resuming from S3 before returning control to the operating system.

 

● ACPI S3 PS2 Mouse Wakeup—Enables or disables waking from S3 due to PS2 mouse activity.

 

● USB Wake on Device Insertion (some models)—Allows system to wake from Standby on USB

 

device insertion.

 

● Unique Sleep Blink Rates—This feature is designed to give the user a visual indication of the

 

sleep state the system is in. Each sleep state has a unique blink pattern:

 

◦

S0 = Solid green LED.

 

◦

S3 = 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e.,

 

 

repeated cycles of 3 blinks and a pause.

 

◦

S4 = 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e.,

 

 

repeated cycles of 4 blinks and a pause.

 

◦

S5 = LED is off.

 

If this feature is disabled, S4 and S5 both have the LED off. S1 (no longer supported) and S3

 

use 1 blink per second.

 

 

Hardware Power

SATA power management enables or disables SATA bus and/or device power management.

Management (some

 

 

models)

 

 

 

 

Thermal

● Fan idle mode—This bar graph controls the minimum permitted fan speed.

 

NOTE: This setting only changes the minimum fan speed. The fans are still automatically

 

controlled.

 

 

 

10 Computer Setup (F10) Utility

ENWW