Solving Software Problems

Most software problems occur as a result of the following:

●The application was not installed or configured correctly.

●There is insufficient memory available to run the application.

●There is a conflict between applications.

●Be sure that all the needed device drivers have been installed.

●If you have installed an operating system other than the factory-installed operating system, check to be sure it is supported on the system.

If you encounter software problems, see the applicable solutions listed in the following table.

Table 2-19Solving Software Problems

Computer will not continue and no HP logo screen has appeared.

Cause

Solution

 

 

POST error has occurred.

Observe the beeps and LED lights on the front of the computer.

 

See Appendix A, POST Error Messages on page 49 to

 

determine possible causes.

 

See the Restore Kit or the Worldwide Limited Warranty for

 

terms and conditions.

 

 

Computer will not continue after HP logo screen has appeared.

Cause

Solution

 

 

System files may be damaged.

Use recovery diskette to scan hard drive for errors.

 

 

“Illegal Operation has Occurred” error message is displayed.

Cause

Solution

 

 

Software being used is not Microsoft-certified for your version

Verify that the software is certified by Microsoft for your version

of Windows.

of Windows (see program packaging for this information).

 

 

Configuration files are corrupt.

If possible, save all data, close all programs, and restart the

 

computer.

 

 

ENWW

Solving Software Problems 47