QuickSpecs

HP ProLiant DL165 Generation 5

Technical Specifications

System Inlet

Operating

10° to 35°C (50° to 95°F) at sea level with an

Temperature

 

altitude derating of 1.0°C per every 305 m

 

 

(1.8°F per every 1000 ft) above sea level to a

 

 

maximum of 3050 m (10,000 ft), no direct

 

 

sustained sunlight. Maximum rate of change

 

 

is 10°C/hr (18°F/hr). The upper limit may be

 

 

limited by the type and number of options

 

 

installed.

 

 

System performance may be reduced if

 

 

operating with a fan fault or above 30°C

 

 

(86°F).

 

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate

 

 

of change is 20°C/hr (36°F/hr).

Relative Humidity

Operating

10 to 90% relative humidity (Rh), 28°C

(non-condensing)

 

(82.4°F) maximum wet bulb temperature,

 

 

non-condensing.

 

Non-operating

5 to 95% relative humidity (Rh), 38.7°C

 

 

(101.7°F) maximum wet bulb temperature,

 

 

non-condensing.

Altitude

Operating

3050 m (10,000 ft). This value may be limited

 

 

by the type and number of options installed.

 

 

Maximum allowable altitude change rate is

 

 

457 m/min (1500 ft/min).

 

Non-operating

9144 m (30,000 ft). Maximum allowable

 

 

altitude change rate is 457 m/min (1500

 

 

ft/min).

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and

 

declared average bystander position A-Weighted sound pressure levels

 

(LpAm) when the product is operating in a 23°C ambient environment.

 

Noise emissions were measured in accordance with ISO 7779 (ECMA

 

74) and declared in accordance with ISO 9296 (ECMA 109).

 

Idle

 

 

LWAd

6.82 B

 

LpAm

51.93 dBA

 

Operating

 

 

LWAd

6.84 B

 

LpAm

51.93 dBA

 

 

 

DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008

Page 28