Computer Setup—Power Management Setup

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 7 Computer Setup—Power Management Setup

Option

Description

 

 

After AC Power Loss

Allows you to select system power loss behavior:

 

●

On

 

●

Off

 

●

Last State

 

 

ACPI Suspend Type

Allows you to set type of ACPI sleep mode:

 

● S1 (Power On Suspend)

 

● S3 (Suspend To RAM)

 

●

S1 & S3

 

 

Wake on PCI Device

Disables/enables PCI S5 on power on.

from S5

 

 

 

 

External Modem S5

Disables/enables wake-up modem from S5.

Wake-Up

 

 

 

 

RTC Alarm Resume

Disables/enables RTC (real-time clock) alarm.

 

 

Date (of Month)

If RTC Alarm Resume is enabled, allows you to select the day of the month for resumption of RTC

 

alarm. (Set to 0 for every day.)

 

 

Resume Time

If RTC Alarm Resume is enabled, allows you to select what time the RTC alarm will resume.

(hh:mm:ss)

 

 

 

 

 

Computer Setup—PnP/PCI Configurations

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 8 Computer Setup—PnP/PCI Configurations

OptionDescription

Reset Configuration Disables/enables automatic reconfiguration.

Data

The default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup, if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the OS cannot boot.

Resources Controlled Allows you to select whether resources are controlled automatically or manually:

By

●Auto (ESCD–Extended Storage Configuration Data)

●Manual

BIOS can automatically configure all the bootable and Plug-and-Play-compatible devices. If you choose Auto, you cannot select IRQ, DMA and memory base address fields since BIOS automatically assigns them.

ENWW

Computer Setup (F10) Utilities 9