Step 3: Connect External Devices

Connect the monitor, mouse, keyboard, and network cables.

NOTE: Arrangement and number of connectors may vary by model.

1

Power Cord Connector

7

Parallel Connector

 

 

 

 

2

Voltage Select Switch

8

Monitor Connector

 

 

 

 

3

PS/2 Mouse Connector (green)

9

Microphone Connector (pink)

 

 

 

 

4

PS/2 Keyboard Connector

10

Line-Out Connector for

 

(purple)

 

powered audio devices (green)

 

 

 

 

5

Universal Serial Bus (USB)

11

Line-In Audio Connector (blue)

 

 

 

 

6

Serial Connector

12

RJ-45 Network Connector

NOTE: If a PCI graphics card is installed, the connectors on the card and the system board may be used at the same time. Some settings may need to be changed in Computer Setup to use both connectors. For information about Boot Order, refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD.

CAUTION: Do not add optional hardware or third-party devices to the computer until the operating system is successfully installed. Doing so may cause errors and may prevent the operating system from installing properly.

ENWW

Step 3: Connect External Devices 3