HP DX2300 Technology Memory Type, Features, Hard Drive Interfaces, Supported Chassis Front Panel

QuickSpecs

HP Compaq dx2300 Microtower Business PC

System Details

Technology and	Memory Type	PC2-5300 DDR2 SDRAM (667-MHz) non-ECC
Features		Up to 2-GB system memory standard
		Up to 4-GB system memory supported
	Hard Drive Interfaces	Serial ATA
	Supported
Chassis	Front Panel	Power button
		Power On LED
		HDD Activity LED
	Cooling Solutions	Power Supply Fan (variable speed)
	Supported	Active heatsink (variable speed)
		Chassis fan (variable speed)
	Slots Supported	Four (4) full-height expansion slots
	Front I/O	Two (2) USB 2.0 ports
	Rear I/O	Standard Micro ATX I/O connectors, including four (4 ) USB 2.0 ports
	Drive Bays	Two (2) 5-1/4” external
		One (1) 3-1/2” external
		Two (2) 3-1/2” internal
	Internal Speaker	Standard
	Security	Padlock loop
		Kensington Lock Support
	Power Supply	250-watt ATX Power Supply – PFC/non-PFC with a 115v/230v line
		switch (varies by country/region)

Unit Environment and Operating Conditions

General Unit Operating Guidelines

Keep the computer away from excessive moisture, direct moisture and the extremes of heat and cold, to ensure that unit is operated within the specified operating range.

Leave a 4 in (10.2 cm) clearance on all vented sides of the computer to permit the required airflow.

Never restrict airflow into the computer by blocking any vents or air intakes.

Do not stack computers on top of each other or place computers so near each other that they are subject to each other's re-circulated or preheated air.

Occasionally clean the air vents on the front, back, and any other vented side of the computer. Lint, dust and other foreign matter can block the vents and limit the airflow.

If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must be provided on the enclosure, and the same operating guidelines listed above will still apply.

Temperature Range	Operating	50° to 95° F (10° to 35° C)
	Non-operating	-22° to 140° F( -30° to 60° C)
Relative Humidity	Operating	10% to 90% (non-condensing at ambient)
	Non-operating	5% to 95% (non-condensing at ambient)
Maximum Altitude	Operating	10,000 ft (3048 m)
(unpressurized)	Non-operating	30,000 ft (9000 m)

NOTE: Operating temperature is de-rated 1.0 deg C per 1000 ft (300 m) to 10,000 ft (3000 m) above sea level, no direct sustained sunlight. Maximum rate of change is 10 deg C/Hr. The upper limit may be limited by the type and number of options installed.

DA - 12668 Worldwide — Version 9 — July 2, 2007 Page 7