Computer Setup—Main

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 1-3Computer Setup—Main

Option

Description

 

 

Date (mm:dd:yy)

Allows you to set system date.

 

 

Time (hh:mm:ss)

Allows you to set system time.

 

 

SATA Port 1

For each, allows you to:

SATA Port 2

● run HDD self-test for selected channel:

SATA Port 3

◦

SMART Status Check

SATA Port 4

◦

HDD Short Self-Test

 

◦

HDD Extended Self-Test

 

● auto-detect HDD size and head

 

● set IDE drive on selected channel to:

 

◦

None

 

◦

Auto

 

● set access mode on selected channel to:

 

◦

Large

 

◦

Auto

 

● view:

 

◦

Firmware

 

◦

Capacity

 

◦

Cylinder

 

◦

Head

 

◦

Precomp

 

◦

Landing Zone

 

◦

Sector

Onboard FDC Controller Disables/enables the floppy disk controller.

Drive A

Allows you to set Drive A to:

 

●

None

 

●

1.44M, 3.5 in.

 

 

 

4 Chapter 1 Computer Setup (F10) Utilities

ENWW