Operating the Monitor

Entering User Modes

The video controller signal may occasionally require a custom user mode if you are not using a standard graphics adapter or pre-set mode. In this condition, you may need to create a user mode. You can use the OSD to:

■Create a user-defined mode with custom monitor screen parameters.

■Readjust the parameters of any user mode.

■Save them in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a pre-set mode.

Ten user modes can be entered and stored, in addition to the factory pre-set modes (see the table “Factory Pre-set Video Input Modes” in Appendix B).

4–16

User’s Guide