HP f1904 manual Selecting the Signal Connectors and Cables, Connecting Speakers

Setting Up the Monitor

Selecting the Signal Connectors and Cables

There are two signal input connectors: One VGA connector and one DVI-I connector. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On-Screen Display (OSD) feature or by pressing the Signal Input 1 or 2 buttons on the monitor front bezel.

The video mode supported by the DVI-I connector is determined by the video cable used. For digital operation, use the DVI-D to DVI-D signal cable provided. For analog operation, a DVI-A to VGA signal cable must be attached to the DVI-I input (not provided with the monitor).

Connecting Speakers

A set of speakers are included with your monitor (select models only).

1.Place the speakers in a location near the monitor.

2.Plug the right speaker into the main power source.

3.Plug the right speaker audio cable (green plug) into the PC. Refer to your PC user’s guide for instructions on how to connect your speakers to the PC.

4.Turn on the PC, the monitor, and the speakers.

3–6 User’s Guide