Setting Up the Monitor

1.Disconnect and remove the signal and power cables from the back of the monitor.

2.Remove the four screws as shown in the following illustration.

ÄCAUTION: Ensure that the bottom of the monitor base is positioned over a table or desktop before removing the base from the monitor.

3.Remove the monitor base from the monitor.

Mounting the Monitor

1.Remove the monitor base. Refer to “Removing the Monitor Base” steps in the previous section.

When the base has been removed, four threaded mounting holes are exposed on the monitor panel. These are to be used for mounting purposes. These mounting holes are spaced 100 mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays.

2.Mount the monitor to a swing arm or other mounting fixture by following the instructions included with the mounting fixture to be used.

3–8

User’s Guide