Memory module

Description

Spare part number

 

 

Memory module (PC2-5300, 533-MHz, DDR2)

 

 

 

512-MB (for use in HP Mini 110 and Compaq Mini 110 only)

537663-001

 

 

1024-MB

537664-001

 

 

2048-MB (for use in HP Mini 1101 NoteBook PC, and HP Mini 110 with Mobile Mi installed only)

537665-001

 

 

Before removing the memory module, follow these steps:

1.Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the device.

3.Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device.

4.Remove the battery (see Battery on page 36).

5.If your device has WWAN capability, remove the SIM (see SIM on page 37.

Remove the memory module:

1.Loosen the 2 Phillips 2.0×3.0 captive screws (1) that secure the memory module compartment cover to the computer.

2.Swing the cover up and away from the inside of the computer (2), and then remove the cover (3).

3.Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the device.)

38 Chapter 4 Removal and replacement procedures