IMPORTANT: Exact package names vary, depending on the software and kernel version chosen.

3.Go to the HP website (http://www.hp.com/support), and then download all of the support rpm packages. These packages provide utilities, firmware, and other files.

For example, see the following table.

Package

What is installed

 

 

fio-util-<VSL-version

VSL utilities—Recommended

>.x86_64.rpm

 

fio-firmware-<firm

Firmware archive—Recommended

ware-version>.noa

 

rch.rpm

 

libvsl-<version>.x8

Libraries needed for management tools—Recommended

6_64.rpm

 

fio-common-<VSL-v

Files required for the init script—Recommended

ersion>.x86_64.rp

 

m

 

fio-sysvinit-<VSL-ver

Init script—Recommended

sion>.x86_64.rpm

 

fio-snmp-agentx-<v

Agentx SNMP subagent—Optional. For more information,

ersion>.x86_64.rp

see "Setting up SNMP for Linux (on page 27)"

m

 

fio-snmp-mib-<versi

SNMP MIBs—Optional. For more information, see

on>.x86_64.rpm

"Setting up SNMP for Linux (on page 27)"

libfio-dev-<version

2.x Management SDK, deprecated—Optional

>.x86_64.rpm

 

libfio-doc-<version

2.x Management SDK, deprecated—Optional

>.x86_64.rpm

 

libvsl-dev-<version

Current Management SDK—Optional

>.x86_64.rpm

 

libvsl-doc-<version

Current Management SDK—Optional

>.x86_64.rpm

 

4.Build your binary rpm from the source rpm. For more information, see "Building the IO Accelerator driver from source (on page 14)." Return to this step when the binary driver rpm is created.

5.Change to the directory where the installation packages were downloaded.

6.To install the custom-built software package, enter the following command, using the package name that you just copied or downloaded into that directory.

rpm -Uvh iomemory-vsl-<kernel-version>-<VSL-version>.x86_64.rpm

7.To install the support files, enter the following commands: rpm -Uvh lib*.rpm

rpm -Uvh fio*.rpm

The IO Accelerator and utilities are installed to the following locations.

Package type

Installation location

 

 

 

 

IO Accelerator

/lib/modules/<kernel-version>/extra/fio/iomemory-vsl.ko

 

 

 

 

Utilities

/usr/bin

 

Firmware

/usr/share/fio/firmware

 

 

Software installation 13