NOTE
hp pavilion fx50 15” lcd monitor Using Your Monitor
When the monitor enters power saving mode, the message No Signal is displayed for a few seconds before the screen blanks. In power saving mode the front panel indicator light is amber.
To set these power saving modes, refer to the manual that came with your computer.
Supported Video Modes
Your monitor comes with the standard modes shown in the table below. It also supports intermediate video modes. With the intermediate modes, the displayed image may need to be optimized using the buttons on the front panel. All modes are
Screen Resolution | Image Refresh | |
Rate | ||
| ||
|
| |
640 x 350 | 70Hz | |
|
| |
640 x 480 | 60Hz, 75Hz | |
|
| |
720 x 400 | 70Hz | |
|
| |
800 x 600 | 60Hz, 75Hz | |
|
| |
1024 x 768 | 60Hz, 75Hz | |
|
|
Selecting a combination of screen resolution/image refresh rate higher than 1024 x 768 at 75Hz will effect display performance.
If you select a video mode not supported by your monitor, the following message will be displayed:
English
19