Step 2. Install the software

Caution If you are installing the software onto a Windows computer, do not connect the USB cable to the computer yet. Install the scanning software before connecting the USB cable. If you are installing the software into a Macintosh computer, you can connect the USB cable either before or after installing the software.

1.Insert the HP Photosmart CD that came with the scanner into the computer CD drive.

For Windows installations: Wait for the installation dialog box to display. If the installation dialog box does not display after a few moments, see Scanner installation troubleshooting on page 12.

For Macintosh installations: Double-click on the CD icon that appears on the desktop, and then double click on the HP Scanjet Scanner Install icon to start the installation.

2.Click Install software to install the scanning software. Follow the onscreen instructions to complete the scanning software installation.

Step 3. Connect the TMA cable

➔Connect the TMA cable from the lid to the scanner base.

English

Setup and Support Guide

5