5. If it is necessary to replace the display bezel or the display assembly internal components, remove the following:
(1)Four rubber screw covers on the display bezel top edge
(2)Two Mylar screw covers on the display bezel bottom edge corners
(3)Two rubber screw covers on the display bezel bottom edge
(4)Eight Phillips PM2.5×8.0 screws that secure the display bezel to the display assembly
NOTE: See Camera module on page 38 for camera module removal information.
6. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display bezel until the bezel disengages from the display enclosure.
7. Remove the display bezel (3). The following display bezels are available:
●For use only with HP G7000 computer models equipped with camera module and microphone, spare part number
●For use only with HP G7000 computer models equipped with microphone, spare part number
●For use only with Compaq Presario F700 computer models equipped with camera module and microphone, spare part number
●For use only with Compaq Presario F700 computer models equipped with microphone, spare part number
58 Chapter 4 Removal and replacement procedures