QuickSpecs

HP t410 All-in-One Smart Zero Client

Technical Specifications – Environmental Data

ECO-LABEL CERTIFICATIONS & DECLARATIONS

This product has received or is in the process of being certified to the following approvals and may be labeled with one or more of these markets:

Energy Star® qualified and EPEAT® Gold registered where applicable/supported. See http://www.epeat.net for registration status by country.

Low Halogen

ENERGY CONSUMPTION

 

115 VAC (60Hz)

230 VAC (50Hz)

100 VAC (60Hz)

Idle State:

7.97 W

8.19 W

8.08 W

Off Mode:

0.48 W

0.48 W

0.42 W

NOTE: This product is in compliance with US executive order 13221, WOL (wake on LAN) disabled. Off Mode measurements are made with WOL disabled.

NOTE: The actual power consumption at your location could vary and is dependent on many factors including but not limited to software load on the thin client, attached peripherals, and environmental factors.

HEAT DISSIPATION

 

115 VAC (60Hz)

230 VAC (50Hz)

100 VAC (60Hz)

Idle State:

34.05 BTU/hr

33.43 BTU/hr

33.23 BTU/hr

Off Mode:

1.50 BTU/hr

1.54 BTU/hr

1.54 BTU/hr

NOTE: Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour

BATTERIES

This product complies with ISO standards:

EU Directive 91/ 157/ EEC

EU Directive 93/ 86/ EEC

EU Directive 98/ 101/ EEC

Batteries used in the product do not contain:

Mercury greater the 5ppm by weight

Cadmium greater than 10ppm by weight

Lead greater than 4000ppm by weight.

Battery size: CR2032 (coin cell)

Battery type: Lithium

RECYCLED MATERIAL

Product

This product contains at least 10% recycled materials (by weight).

 

This product is at least 90% (by weight) recyclable when disposed of properly at end of

 

life.

DA - 14267 North America — Version 14 — September 13, 2013

Page 10