Use the HP JetAdmin Software to Configure the Print Server

1.Log onto the network with Supervisor privileges.

2.Double-click the HP JetAdmin icon in the HP JetAdmin Utilities group.

3.The following message may be displayed: “JetAdmin could not find any configured devices on your network. Do you want to configure one now?” Click Yes and go to Step 5. (If this message is not displayed, go to Step 4.)

Note

If your printer does not appear in the list of

 

available printers, select a refresh option from the

 

Device Refresh pull-down menu.

 

 

4.If the HP JetAdmin Utility screen is displayed, select a refresh option from the Device Refresh pull-down menu to refresh the HP JetAdmin Utility screen. All configured print servers are displayed. Now, select Device, New.

5.On the Network Browser screen, highlight the hardware address of your print server. (The 12-character hardware address is on the configuration page or on the bottom of the external print server.)

6.Click Configure. The General screen is displayed.

7.Type the name of the print server and a description (optional); then click Next. The NetWare screen is displayed.

8.Click Operating Mode and select Queue Server Mode.

12 Novell NetWare Networks (Windows 3.1 Client)

EN