HP Jetadmin Software for SunOS 20

Configuring a Printer in Queue Server Mode (Bindery)

You can configure a printer in queue server mode on a NetWare 3.x and 4.x (Bindery) network. This mode supports 16 file servers and 64 print queues per HP JetDirect print server port. This mode also prevents other printers from accessing data sent to the configured queue(s) without SUPERVISOR’s intervention.

Before you configure the HP JetAdmin software, make sure the following tasks have been performed:

●Internal print servers: The print server is installed in the printer and the printer is connected to a network.

●External print servers: The print server has power and is connected to the printer’s parallel port and network.

●The printer is turned on, is online, and you have printed a configuration page.

If you have not printed an HP JetDirect configuration page from your printer, see the hardware installation guide for your

HP JetDirect print server or your printer’s getting started guide for instructions.

Note	If you are servicing NDS and Bindery queues on the
	same file servers, the HP JetDirect print server will
	log onto the server twice, taking two user licenses.

14 Novell NetWare Networks (Windows 3.1 Client)