6.If you are configuring a new printer, select the LAN hardware address of the HP JetDirect print server attached to the new printer, then click Configure. The address of the HP JetDirect print server is listed on the HP JetDirect configuration page.
7.Type the new name of the printer. This is the name that will appear on the network.
8.Type a general description of the printer such as the type of printer, options in the printer, and printer location. This description is optional.
9.Click Next. The NetWare screen will display.
10.Click Operation Mode, then select Remote Printer.
11.Select the print server’s name in the Novell Print Server box.
12.Select the printer number (assigned in PCONSOLE in step 2) in the Printer Number box.
13.Click Queues.
To add or remove queues from the list, click Change, add or remove queues for the printer, then click OK. At least one queue must appear in the list of Queues Serviced.
14.If desired, click Notification to view the users or groups to be notified of problems with this printer.
Click Next. The TCP/IP screen is displayed.
Changing the TCP/IP settings is optional. When completed, click Next.
15.Click Finish.
When asked to save the new device configuration, click OK. Then return to the HP JetAdmin Utility screen and verify that the new device was added.
To verify the configuration, see the next section, “Verifying the Configuration.”
EN | Novell NetWare Networks (Windows 9x & NT/2000 Client) 35 |