To Configure the Printer
1.Click Start, Programs, HP JetAdmin Utilities, then click HP JetAdmin.
2.Click Device on the menu bar at the top of the main window, then do one of the following:
■Click New to configure a new printer.
-or -
■To change an existing printer configuration, highlight the printer you want in the list of printers in the main window, then click Device, Modify.
Note | If your printer does not appear in the list of |
| available printers, select a refresh option from the |
| Device Refresh |
|
|
3.If you are configuring a new printer, select the LAN hardware address of the HP JetDirect print server attached to the new printer, then click Configure. The address of the HP JetDirect print server is listed on the HP JetDirect configuration page.
4.If you are using IPX/SPX, type the name of the printer. This is the name that will appear on the network (for example,
LJ5_floor2).
5.Type a general description of the printer (such as the type of printer, options in the printer, and the printer location). This description is optional.
6.Click Next to display the TCP/IP properties page.
EN | Microsoft Windows 95/98 Networks |