![](/images/new-backgrounds/1270299/27029943x1.webp)
Mounting the Monitor
The monitor panel can be attached to a wall, swing arm, or other mounting fixture.
1.Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base on page 13 in the previous section.
2.To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a
Figure 3-13 Mounting the Monitor
To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.
3.Reconnect the cables to the monitor panel.
14 Chapter 3 Setting Up the Monitor | ENWW |