Table A-10Factory Preset Modes (continued)

8

1680 × 1050

65.29

59.954

 

 

 

 

9

1920 × 1080

67.5

60.00

 

 

 

 

Table A-11High Definition Video Formats

Preset

Timing Name

Pixel Format

Horz Freq (kHz)

Vert Freq (Hz)

 

 

 

 

 

1

480p

720 × 480

31.469

60

 

 

 

 

 

2

576p

720 × 576

31.25

50

 

 

 

 

 

 

3

720p50

1280

× 720

37.5

50

 

 

 

 

 

 

4

720p60

1280

× 720

45

60

 

 

 

 

 

 

5

1080p50

1920

× 1080

56.25

50

 

 

 

 

 

 

6

1080p60

1920

× 1080

67.5

60

 

 

 

 

 

 

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

You are not using a standard graphics adapter.

You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In addition to the factory preset modes, there are at least 10 user modes that can be entered and stored.

Energy Saver Feature

The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize .5 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features).

NOTE: The above power saver feature only works when connected to computers that have energy saver features.

By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the monitor to enter the reduced power state, the power light blinks amber.

ENWW

Entering User Modes 27