QuickSpecs

HP StorageWorks Ultrium Full-Height Tape Drives

Product Highlights

LTO Ultrium Technology Linear Tape-Open technology was developed by three leaders in the storage industry - HP, IBM, and Quantum - who brought together their combined expertise in tape technology to develop an entirely new format based on the best of existing technologies. Because LTO Ultrium technology was a new format, it required no cumbersome support of legacy formats, so it could be designed without compromising on reliability or performance. The LTO Program, a consortium of the three technology provider companies, has developed a well-defined six-generation roadmap.

Ultrium LTO-1 and LTO-2 tape drive technologies from HP use a linear format of 384 tracks and 512 tracks (respectively), writing eight tracks simultaneously. Ultrium LTO-3 and the new LTO-4 tape drive features a breakthrough in recording technology by writing sixteen tracks simultaneously on a linear format of 704 tracks and 896 tracks (respectively). The data is written in a serpentine pattern; the tape reverses direction after each set of tracks is written. This provides higher density recording, enabling customers to lower costs and increase efficiency by storing more data on a single tape in an industry standard format.

The LTO standard for backward compatibility is to write back one generation and read back two generations; therefore:

First-generation Ultrium drives (HP Ultrium 230, HP Ultrium 232) read and write LTO 1 media Second-generation Ultrium drives (HP Ultrium 460, HP Ultrium 448) read and write LTO 1 and LTO 2 media.

Third-generation Ultrium drives (HP Ultrium 920, Ultrium 960) read and write LTO 2 and LTO 3 media and also read LTO 1 media.

Fourth-generation Ultrium drives (Ultrium 1840) read and write LTO 3 and LTO 4 media and also read LTO 2 media.

As part of the LTO open standard, all HP tape drives and media offer the same standards of compatibility with tape drives and media manufactured by other LTO vendors.

LTO data compression (LTO-DC) is an enhanced version of Advanced Lossless Data Compression (ALDC) hardware compression. Compression is automatically turned off if the compressed data would cause an overall expansion in data size, hence optimizing the available capacity on the media. Data compression is also turned off if data is found to be uncompressible; thus, allowing for better data scans. The system is used in all Ultrium tape drives.

The decision about which tape technology you should buy next should be based on your future, not your past, investment. Choose the Ultrium format when you need the following advantages:

Maximum reliability, capacity and performance

Compatibility with a broad range of operating systems and servers (e.g., a mixed system environment)

A legacy-free technology that uses the best attributes from a wide range of tape technologies without any compromises for backward compatibility requirements

A solid roadmap for future generations of the technology An open format available from multiple vendors Lowest media cost of any 'superdrive' tape technology

DA - 11739 Worldwide — Version 31 — January 25, 2008

Page 5

Page 4 Page 6
Page 5
Image 5
HP LTO-4 1840 manual Product Highlights
Page 4 Page 6

LTO-4 1840 specifications

The HP LTO-4 1840 tape drive is a pivotal data storage solution shaped by the need for efficient, high-capacity tape storage. As part of the Linear Tape-Open (LTO) technology series, this tape drive was designed to cater to the growing demands of businesses for secure and reliable data backup, archiving, and recovery solutions.

One of the standout features of the HP LTO-4 1840 is its impressive storage capacity. Each cartridge can hold up to 800 GB of compressed data, which is ideal for enterprises needing to manage large quantities of information. When dealing with uncompressed data, the capacity is 400 GB, showcasing significant increases over previous generations. This advancement increases efficiency and reduces the frequency of tape changes, streamlining the backup process.

The LTO-4 technology also introduced a notable enhancement in transfer rates. The HP LTO-4 1840 boasts a native data transfer rate of 120 MB/s and up to 240 MB/s compressed. Such speeds provide businesses with faster backup and restore operations, minimizing downtime and enhancing productivity.

In terms of compatibility and flexibility, the HP LTO-4 1840 is backward compatible with LTO-3 and LTO-2 tape formats. This backward compatibility ensures that organizations can seamlessly transition to newer storage technologies while still utilizing their existing tapes, protecting their investment in legacy data storage systems.

Data durability is another hallmark characteristic of the HP LTO-4 1840. The tape drive employs advanced error correction and data integrity technologies, ensuring that stored data remains intact over long periods. Additionally, the drive utilizes a robust mechanism to reduce wear and tear on tapes, extending their longevity and reliability.

Security features are also embedded in the LTO-4 framework, including AES 256-bit encryption, which secures stored data and ensures compliance with various regulatory requirements. This encryption capability protects sensitive information from unauthorized access during the backup process.

The HP LTO-4 1840 tape drive is optimized for a range of environments, including small, medium, and large enterprises. With its combination of high capacity, fast transfer rates, robust security features, and compatibility with previous generations, this tape drive remains a reliable choice for organizations looking to safeguard their critical data assets effectively.
Top Page Image Contents