•A power surge or electrostatic discharge may have affected the camera. Remove the batteries and reset the camera (see “Resetting the camera” on page 32). Then reinstall the batteries and turn on the camera.
•Recharge the batteries.
•Connect the camera to AC power via an optional HP Photosmart dock, then turn on the camera.
•Replace the batteries.
I am having a problem installing or using the HP Photosmart Software.•Make sure your computer meets the minimum system requirements as stated on the camera packaging.
•Refer to the HP Photosmart Software online help system.
•Refer to the
Camera error messages
Should you receive one of the following error messages when using your camera, you can look up details about the message by visiting www.hp.com and searching on the specific code.
•Lens Error•Batteries Low (followed by data on battery types and
My camera shuts down unexpectedly. | 37 |