●15 seconds

●30 seconds

Computer Setup—Advanced BIOS Features

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 4 Computer Setup—Advanced BIOS Features

Option

Description

 

 

 

 

 

 

 

Device Boot Disabling

Allows you to restrict a device from booting the unit. You can disable as a bootable device:

 

●

None

 

●

USB

 

●

Internal ODD

 

●

Internal FDD

 

● USB + ODD + FDD

 

 

 

 

 

 

 

F9 Boot Menu

Disables/enables F9 Boot Menu.

 

 

 

 

 

 

 

Factory Recovery Boot

Disables/enables the ability to boot to the Recovery partition at startup. Enabling this feature will add

 

the <F11>Recovery prompt to the startup window.

 

 

 

 

 

 

 

F11 Prompt

Disables/enables the <F11>Recovery prompt at startup. However, if this feature is disabled and

 

the Factory Recovery Boot is enabled, pressing F11 will still boot the computer to the Recovery

 

partition.

 

 

 

 

 

 

 

Hard Disk Boot Seq.

Allows you to specify the order of attached hard drive devices (such as USB HDD storage, USB2

 

Drive Key, or USB flash media). The first drive in the order has priority in the boot sequence and is

 

recognized as drive C (if any devices are attached).

 

 

 

 

 

 

 

Optical Drive Boot

Allows you to specify the order in which attached optical drives (including USB ODD) are checked

Seq.

for a bootable operating system image.

 

 

 

 

 

 

 

Network Boot Seq.

Allows you to specify the order in which network devices (including UP NIC cards) are checked for

 

a bootable operating system image.

 

 

 

 

 

 

 

First Boot Device

Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the

Second Boot Device

four:

 

 

 

●

Removable

Third Boot Device

●

Hard Disk

Fourth Boot Device

●

CDROM

 

 

●

Network

 

●

Disabled

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating

 

 

 

 

 

 

 

 

 

 

 

system has started.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Boot Up NumLock

Allows you to set the default NumLock status to off or on.

Status

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 Computer Setup (F10) Utility

ENWW