Using the on-screen menu

Changing settings using the on-screen menu

You can change the on-screen menu settings with the buttons on either the projector or the remote control.

1.Press enter on the projector or remote control. This displays the on-screen menu.

2.Press up or down to highlight the desired menu icon, then press right to move into that menu.

3.Press up or down to highlight a setting, then press enter to begin adjusting the setting.

4.Press left or right , or press up or down , to adjust the setting, as prompted.

5.Press enter to return to the menu.

6.To go to a different menu, press left and select a menu.

7.To close the on-screen menu, press the exit button.

If you do nothing for a period of time, the on-screen menu closes. To change the amount of time until the on-screen menu closes, press enter and select Setup > Timeout for menu.

TIP: To exit from any on-screen menu or adjustment, press the exit button.

36 Adjusting the Projector